Asphalt, Basement Seepage, Building, Building Safety, Construction, Construction Management & Monitoring, Decks and Balconies, Home Inspection, Home Owners Association (HOA), Maintenance, Paving Maintenance, Reserve Studies
posted by Ross Hardy

How to Hire a Condo Engineer: 4 Steps

Make sure you actually need one, too

They don’t teach you how to hire an engineer in school. Indeed most folks have never had the occasion to hire an engineer or an architect in their whole life. This is also true for most condominium or HOA board members. So how does a condo board go about successfully hiring the right engineering firm for their upcoming project?

1. Evaluate the Need

Perhaps the first question to be asked is ‘do we even need an engineer?’ Not all projects do. Some repair projects are so straight forward and obvious the board can hire a contractor with the proper skills and run the project by a committee chair or a property manager who has expressed confidence she’s managed many similar repair projects. Some projects requiring some engineering expertise, such as replacing the common HVAC equipment or upgrading the common electrical systems, do not need an engineer to manage it but rather the right choice by the board would be to seek an HVAC or electrical contractor capable of providing ‘design/ build’ services for both a timely and economically satisfactory project.

The complexity of the project and criteria needed to be complied will determine whether an engineer is needed. Typical projects in this category will include designing a new storm water drainage system for the entire HOA; performing a reserve fund study; or evaluating and design of a new foundation for one or more buildings in the condo complex. It should be noted, the term ‘engineer’ in this article refers to a professional engineer (P.E.) licensed in the state of Maine. Though other unlicensed engineers can work on the project, only a licensed engineer can stamp (preliminary and final) construction documents for town planning board review; building permits; and other municipal requirements.

2. Selecting the Engineer

Once the need is determined, selecting an engineer is the next major step. The process starts with defining the project with a clear and complete description of the scope of work. Many property managers have the resources to provide considerable assistance to the board in developing this scope of work. While the scope of work is being prepared, a list of two or three engineering firm should be created. Clearly this list should be made up of engineering firms providing the services needed for the subject project. Here again the condo’s property manager can be a good source of finding the right firms. Similarly, engineers listed in the Condo Media’s directory can make this task relatively easy because the engineers listed will be firms with experience in not only the technical issues involved but also are familiar with the world of condominiums and their special needs.

3. Preparing the RFP

Once the potential list of firms is developed, a Request for Proposal (RFP) can be prepared. This document will utilized the defined scope of work to ensure all interested parties are preparing their responses with a similar understanding of the board’s objectives. Typical RFP’s have four major elements:

1) General Information for the Engineer
2) Technical Requirements
3) Criteria for Selection
4) Scope of Work Statement

On some projects it may necessary to invite the potential firms to visit the site for a tour to outline the issues or special conditions impossible to clearly delineate in the RFP. Following the distribution of the RFP to the listed firms, the board will screen the proposal responses; select firms it wishes to interview; and schedule the interviews (45 minutes to 1 hour) to allow both the engineering firm and the board to clarify any questions or concerns arising during the proposal preparation process.

4. The Interview and Contract Process

This interviewing process is most important. Typically, the principal or senior member of the engineering firm attends the interview giving the board a first-hand impression of the firm’s approach to this project; a clear commitment to the technical resources available for this project; and past relevant experience predicting a likely successful outcome. The interview also allows the engineering firm a better understanding of how the board will be making decisions and committing adequate representation to ensure proper administration of the project.

Following this interview the board should select it first choice for the project’s engineer. At that time the contract is negotiated. Often the contract is a direct reflection of the requirements of the RFP and the conditions and fee found in the engineering firm’s proposal. These negotiations on occasion will result in changes to the scope of work and the fee. If agreement cannot be reached on issues acceptable to the board, the board can begin discussions with their second engineering firm choice in order to feel comfortable with their selection. It is critical the board feels they have selected a firm they can work with and have confidence future communications and project outcome will meet their community’s needs.

Awarding the contract to the successful engineering firm is only the beginning. A kick-off meeting to introduce all of the project team members on both sides; a review of everyone’s obligations; and establish a clear line of authority and communications. In starting any major project, the board should always remember that just like dealing with a lawyer or a doctor, the engineer’s job is to provide competent technical information and solutions but it is the board’s responsibility to make the business’ decisions. History has shown a well- defined scope of work coupled with a board making timely decisions is a recipe for a successful project.

Article written by Jack Carr, P.E., R.S., LEED-AP, Criterium Engineers
Published in Condo Media January 2020 edition
Download a PDF Version of this Condo Media Article

Home Owners Association (HOA), Transition Study
posted by Kyle Hardy

Transition Study, Reserve Study. What’s the Difference?

Most home owners association board members understand what a reserve study is and the beneficial role it plays in managing the financial future of the community association. Another study that comes up for recently constructed associations and is equally as important is the transition study.

A reserve study analyzes the capital items that the association is responsible for maintaining, which typically include Criterium-Hardy Engineers - HOA Home Owners Association Transition Study & Engineering Services roofs, siding, and concrete. The reserve study provides information regarding each item, including its life expectancy, and the cost to replace it in the future. Specifically, a reserve study is looking to see if and when the item will deteriorate due to ordinary wear and tear. A transition study, on the other hand, has a narrower purpose.

This type of study identifies and documents potential construction or design deficiencies. The key word with a transition study is “defect.” For example, a transition report would reveal such items as roof leaks, water infiltration, or concrete settlement caused by poor craftsmanship or design. A cost estimate to remedy the defect is normally provided as part of the analysis.

Each study is also different in purpose. The purpose of a reserve study is to assist the association in future budgeting for the cost to repair its capital items. Throughout the life of an association, maintenance and repair is an ongoing issue that the board continually needs to address. For example, even if a roof was just replaced, the association should immediately begin to budget for future roofing repairs and costs based on the life expectancy of the new roof. On the other hand, a transition study, ideally just occurs once at the time the property transitions over from the developer’s control to the homeowner board. At this juncture, some high quality developers will even order the transition study so that they can turn over the property with a “clean bill of health.”

More frequently, the association’s board orders a transition study when it takes over control of the association from the developer. When transition occurs, a transition study should immediately be ordered. The study then serves a twofold purpose. First, it can be forwarded to the developer along with a demand to address and repair any deficiencies or construction defects. Since an independent, unbiased evaluator performs the study, it generally has more leverage in pressuring the developer to voluntarily comply with correcting the defects. If the demand and further negotiations prove unsuccessful, the transition study can alternatively be used as evidence in litigation to force the developer to pay for needed repairs.

By requesting a transition study, the board also ensures that it has fulfilled its fiduciary duty. The study serves as an independent, expert analysis that the board can use to make sound business decisions in terms of properly addressing construction defects. Just like with reserve studies, a transition study takes the guess work out of identifying repairs, the cause for repairs, and the costs.

Although similar in some respects, the reserve study and transition study serve very different purposes. The reserve study can and should be ordered and then updated in the future to accommodate the ordinary wear and tear that the common elements will suffer, whereas the transition study looks back in time to discover defects caused by the developer or its contractors.

Learn more about Criterium-Hardy’s Reserve Study services.

Home Owners Association (HOA), Reserve Studies
posted by Kyle Hardy

Seven Things You Need To Know Before Conducting Your Next HOA Reserve Study

One of the primary business duties of Home Owners Associations is maintaining and preserving property values of the Association’s common property. To do this properly, Home Owners Associations must develop funding plans for future repair or replacement of major common area components. An HOA reserve study is a budget planning tool that identifies the current status of the reserve fund and establishes a stable and equitable funding plan to offset the anticipated future major common-area expenditures.

1. All HOA Reserve Study preparers are not equal.

There are a number of ways to evaluate the qualifications of the person or firm whom you are going to retain to perform your study. Key factors when making your decision should include the following: knowledge and experience of the provider, ability to understand the clients’ needs, local expertise and availability, quality control and accountability, and professional education. A key to evaluating this qualification is to have this portion of the work performed under the direction of a licensed Professional Engineer (PE), as the license confirms that the person has been trained and educated in performing this type of evaluation.

2. All Reserve Studies are not equal.

Until just a few years ago, most reserve studies included a list of all of the components, their replacement cost, and remaining useful life in order to determine what the next years funding should be. After many years of discussion and development by the Reserves Committee of the Community Associations Institute, it was agreed by the leading Providers from across the United States that all Reserve Studies should include not only this “Physical Analysis” but also a comprehensive “Financial Analysis”. This is now the standard. The physical analysis is important because it determines the existing condition and actual expected life of the common elements. The financial analysis focuses on the planning and budgeting of replacing these common elements, and includes a cash flow projection of the reserve fund over a 20-year period.

3. Full Funding of a HOA Reserve Study may mean that you are over funded.

There are a number of different “Funding Goals” which are recommended for use as the basis for your Association’s future reserve fund planning. “Baseline Funding” is when the cash flow projection reaches $0 at some time over the projection period. “Component Full Funding” is based on keeping every individual component within the Study 100% funded. In most instances, this will result in a significant amount of funds, which are never used during the cash flow projection period. “Threshold Funding” is when the amount in the fund during the cash flow projection period is based upon keeping a minimum balance within the fund. “Statutory Funding” is based upon the establishment of the amount to be funded as dictated by the local state requirements.

HOA Reserve Study Funding

4. The Replacement Costs included within a HOA Reserve Study should consider replacement alternatives, not just replacement with the exact same component or system.

In many instances the original component, which is being replaced, either is no longer available or has become outdated since it was first installed. By making recommendations for alternatives to the initial installation, the Association may be able to install a replacement component or system with a significantly longer life, such as a new type of roofing system, or a component or system which is much more energy efficient such as a new HVAC system. In both cases, this will result in either a reduction in the recommended contributions to the Reserve Fund or a reduction in your energy costs.

5. The Reserve Study can be used for much more than just estimating the Association’s contributions to the Reserve Fund.

The Reserve Study cash flow analysis can also determine how the Association’s Reserve Funds can be invested. They give the Association the ability to plan for the actual replacements, therefore making it easier to negotiate more effectively with contractors. An investment plan can be established to maximize the return on these funds based upon when they will be needed.

6. The HOA Reserve Study will not be the only funding the Association will need for the upkeep of the common elements.

The Reserve Study is only for the major repair or replacement of the common and limited common elements that are the Association’s responsibility. A reserve fund is intended to cover non-annual maintenance, repair and capital improvement costs. If the proper maintenance is not performed, it can result in a significant loss of useful life for the reserve components.

7. The actual cost of performing the replacement work, when it occurs, may vary from the costs included within the study.

In preparing the reserve study, the replacement costs that are used are based upon both industry estimating standards as well as the actual cost of similar projects that have been performed. Actual costs at the time work is done are influenced by many variables, and in order to keep the replacement costs as well as the anticipated useful lives current, the Reserve Study should be updated (including a site visit) on a regular basis.

Learn more about the Reserve Study.

Home Owners Association (HOA), Reserve Studies
posted by Kyle Hardy

What Are Reserve Studies & How To Select A Provider?

“Assessment increases and stronger reserve funds will be needed to repair aging properties” was the number one prediction of experts surveyed by Common Ground, the magazine of the Community Associations Institute.

The most important element of credible reserve studies is valid component data.

Recent legislation in several states also emphasizes properly funded reserves and cites reserve studies as a necessary procedure in estimating funding requirements.

Capital Reserves are for projected repairs and replacements. Items such as regular periodic (non-annual) repairs (e.g., painting), irregular periodic repairs (e.g., deck surfacing), foreseeable failure, catastrophic failure, and outdated design/aesthetics may be included in a Capital Reserve budget.

Scope of Services

The standard, or full reserve study consists of five elements. The Component Inventory is the task of selecting and quantifying Reserve Components. Condition Assessment is the task of evaluating the current condition of the components. Life and Valuation Estimating establishes the Useful Life, Remaining Useful Life, and Repair or Replacement Cost estimates for the Reserve Components. Fund Status is determined by projecting the current and future funding of the Capital Reserve Account against current and future repair and maintenance requirements. The Funding Plan is intended to create options for achieving the desired funding levels to offset anticipated expenditures.

It is critical at the outset of any project to clearly define the scope of services. Annual maintenance items are typically excluded from a reserve study. The minimum scope of service may also be defined by statutory regulation.

Standards of Reserve Studies

In 1998, the Community Associations Institute adopted National Reserve Study Standards. The standards define three levels of service (a full reserve study as defined above, an update, and an update without an on-site visit), definitions of various terms, and the contents of the report. The standards also create the professional designation Reserve Specialist. The designation is awarded by CAI to individuals with the appropriate background, experience, and references, following a review of their work by the Reserve Specialist Designation Board.

State Legislation

Prompted by foreclosures and mismanaged properties, a number of states have already passed legislation governing the management of Common Interest Realty Associations (CIRAs). Among those that have passed legislation are Alaska, California, Florida, Hawaii, Illinois, Indiana, Massachusetts, Michigan, Minnesota, Oregon, Texas, and the District of Columbia. Some states address reserve studies broadly. Others are more specific.

For example, the California Davis-Stirling Common Interest Development Act states in part: At least once every three years the board of directors shall cause a study of the reserve account requirements of the common interest development to be conducted if the current replacement value of the major components which the association is obliged to repair, restore, replace or maintain is equal to or greater than one-half of the gross budget of the association for any fiscal year.

Florida statutes are even more specific. These accounts shall include, but are not limited to, roof replacement, building painting, and pavement resurfacing, regardless of the amount of deferred maintenance expense or replacement cost, and for any other item for which the deferred maintenance expense or replacement cost exceeds $10,000. The amount to be reserved shall be computed by means of a formula which is based upon estimated life and estimated replacement cost or deferred maintenance expense of each reserve item.

How to Select a Reserve Study Consultant

The most important element of a credible reserve study is valid component data. Inaccurate cost information, improper assessment of the condition of each component, and failure to examine ways of maintaining components to prolong their useful life can lead to underfunding or, almost as problematic, overfunding of the reserve account.

Reserve studies are a professional opinion. The value of that opinion is directly related to the knowledge and expertise of the person rendering it. Always ask the consultant for references and a statement of experience and qualifications. Even this may not tell the whole story, however. Here are some other factors to consider.

Is the consultant locally based? Materials and their performance will vary according to regional preference and climate.
Does the consultant thoroughly understand building systems? Databases work only for typical systems and components, not actual ones.
Does the consultant have the ability to diagnose problems, design repairs, and oversee construction? A reserve study also includes an evaluation of defective components and systems in need of immediate repair.
Will the consultant be available for questions and follow up? Often, there is a need to explain the findings to the board or individual members.
Does the financial model have credibility? The model and format should be prepared by someone with an accounting background and comply with the guidelines of the American Institute of Certified Public Accountants.

The Engineering Advisor is intended to enhance your knowledge of technical issues relating to buildings. For additional information on any subject, please feel free to call us. Our commitment is to provide you with timely, accurate information.

PAY

Reserve Study

PCA

Reserve Study

How to Hire a Condo Engineer: 4 Steps